fertlotto.blogg.se - Jabra direct not recognizing

#Jabra direct not recognizing Bluetooth#
#Jabra direct not recognizing series#

Use a 85638-01 adapter to extend the APC-4/ APC40/ APC-42/APC-43 audio input to reach the headset jack on the phone.Įcho problem with your Cisco IP phone and wireless headset? Set the Handset/Headset monitor in Cisco Call Manager to Disabled.

Connect the APC-4 / APC-40/ APC-41 into the expansion module.

Plug the expansion module (into the telephone AUX connector.

If Cisco phone is equipped with a Cisco 7914, 7915, 7916 expansion module (sidecar): You will need Plantronics H-Series headsets + Plantronics Cisco 2.5mm cableįor Cisco CIPC, CUPC, Jabber softphone Compatible Headsets, GO HERE instead. These phones do not have a headset port and requires an amplifier.įor Cisco 7920, 7921, 7921G, 7925G, 7926G, 7929 wireless IP Phone. Use any Plantronics H-Series Headset with a Plantronics 2.5mm Quick Disconnect Coil Cable 10ftįor Cisco 7811, 7902G, 7905G, 7906G, 7910G, 7911G, and 7912G, you will need the Plantronics H-Series headsets + Plantronics M22 amplifier. If you have a Cisco SPA models (SPA 3xx, 5xx, 9xx ), GO HERE insteadĬisco E20 video phone, u se any Plantronics H-Series Headset with a Plantronics Polaris U10P Cable (part# 27190-01). See our Cisco Phone Hookswitch compatiblity chart below: To add remote answering on your Cisco IP Phone, you can add a handset lifter ( HL10 or GN1000) or a EHS hookswitch cable.

Wireless Headset: Both Plantronics and Jabra/GN Netcom wireless headsets are compatible with Cisco IP phones.

Or pick from any one of the pre-packaged Cisco certified headsets below. These headsets already include the GN1200 smart cable (use setting 2). Jabra (GN Netcom) Corded Headsets: Use any Jabra Headsets from the Jabra/GN Direct Connect Headsets page.

#Jabra direct not recognizing Bluetooth#

In the Sound box, click the Playback tab, select the Bluetooth device, click Set Default, and then click OK. In Control Panel, click Hardware and Sound. Click Start, and then click Control Panel. With the user-friendly Direct Dashboard, staying current has never been easier. For your convenience you can perform the steps provided: a. In Device settings, click Reset to open the Restore device settings dialog. Jabra Direct allows for remote call control of softphones. These two parts make one headset solution for your Cisco phone Jabra Direct makes sure that your headset always has the latest firmware, guaranteeing you’ll have the most up-to-date features, bug fixes and easy access to compatibility updates. Prerequisites In Jabra Direct, select your device. Plantronics Corded Headsets: Select any Plantronics H-Series Headset + this special Plantronics 26716-01 Cisco Cable. If your Cisco Phone is not listed, call us for compatibility.

|_ Digium D40 D50 D60 D70 D80 Headsets.

#Jabra direct not recognizing series#

|_ Polycom VVX, Poly Edge Series Headsets.